April William Backyard November 28th, 2018 - 01:57:33
With aquascape landscape, fountain kits adding a stunning decorative fountain to your garden or landscape has never been easier. The variety of decorative options ensures there is a fountain perfect for any space. Follow this video tutorial for a trouble-free installation, landscape, fountain kits include everything needed except gravel to create a water feature in any setting before you get started. Select a location for the fountain locations near decks or patios are ideal, so you can enjoy. Relaxing next to your water feature, make the fountain visible from a regularly used window or patio door to provide views and enjoyment from both inside and outside your home. Set the aqua basin in the desired location then mark out the area using a can of brightly colored spray paint to trace around the outside of the basin. Using the traced area as a guide dig the hole for the aqua basin roughly 1/2 inch to inch deeper than the height of the basin.
The additional depth will allow the basin to sit flush with the ground. Once the gravel is added, it is important to provide a level excavation for the aqua basin, use a soil tapper to properly compact the soil. This will prevent unnecessary, settling during or after installation sent the aqua basin into the excavation and make sure it sits level from side to side and front to back thoroughly backfill the sides with dirt or sand to prevent future shifting of the basin, depending on which kit You select, you will install one two three plumbing lines, if installing a kit with a single plumbing line run the pipe into the pre-drilled Center cylinder of the Aqua basin, if installing a kit with more than one plumbing line, one or more deck cylinders may need to Be drilled out determine the desired location of each fountain piece or plumbing line and identify which deck cylinders will need to be drilled. Then, using a spade bit or hole saw drill, a hole for each plumbing line, drill each hole approximately 1/4 inch wider than the diameter of the pipe being used carefully position. The decorative fountain on the basic level, the decorative fountain from side to side and front to back place the provided aquascape pump in the basin and connect the plumbing to the pump.
The pipe should fit snug on each fitting to create a watertight seal. If plumbing fits loosely. The hose clamp, not included, can be used to secure the attachment if adding optional lighting, to bring the water feature to life at night install it. At this time, deck cylinders can be drilled to run low voltage lighting cables beneath the deck of the basin. Keeping lighting cables out of view cover the remainder of the basin, with a layer of gravel or river stones to conceal the basin and blend the water feature into the surrounding landscape. Fill the basin by adding water to the pump, access or simply place a running garden. A hose on top of the basin, the installation of your backyard waterfall landscape, fountain kit is now complete, plug in the pump and enjoy the relaxing sights and sounds of your new aquascape fountain at the aquascape.